Anti-corrosive products for galvanized surfaces
The choice of the anti-corrosive system / product to be applied in an industrial environment must take into consideration all the technical parameters relating to the anti-corrosive protection of the system, location, type of support, size, weight of the product and so on. Therefore it is necessary to have suitable products for specific industrial painting systems.
The wide range of products we supply allow us meet the requirements of our Customers.
Contact us to request the supply of specific primer for zinc, anchoring primer for galvanized substrates, anticorrosive enamel with a high zinc phosphate content and much more.
Contact us to request a no-obligation quote. We are widespread among the provinces of Modena, Mantua, Verona and neighboring. We also have many authorized distributors in different regions of Italy.
NEW GALVANT
Satin, finish-primer enamel for iron, especially for galvanized and PVC surfaces.
Overcoating interval: after 24 hours
Application for exteriors
Colour
Unisystem tinting colour 15/5 ratio normal and bright shades
Packaging
4 Kg and 20 Kg
Dilutionl
Spray application : 10-15% with Nitrosol / Brush application: 5-10% with Sinteso
Application
Brush – roller – spray
Yield
8-10 sqm/Kg
DECAZIN “water-based“
Cleaning and degreasing solution for galvanized surfaces. Accelerated aging properties.
Application for exteriors
Colour
Transparent
Packaging
5 Liters and 20 Liters
Dilution
Ready to use
Application
Brush – immersion
Yield
18-20 sqm/Lt
ZINCOFOS
Fast drying, anchor primer for galvanized supports.
Overcoating interval: after 2-3 hours
Application for exteriors
Colour
Ral 7035 grey
Packaging
5 Kg and 26 Kg
Dilution
10-15% with Nitrosol
Application
Brush – spray
Yield
6-7 sqm/Kg (1 coat) 30-40 microns thickness
ANTIkorros “ZN”
Anticorrosive primer, high zinc phosphate content, for industrial systems. It can be painted over with nitro-polyurethane.
Overcoating interval: see technical data sheet
Application for exteriors
Colour
Ral 7035 grey
Packaging
26 Kg
Dilution
10-15% with Nitrosol
Application
Spray
Yield
5-6 sqm/Kg (1 coat) 30-40 microns thickness
A perfect base for a any kind of finishing
A perfect finish is the result of careful surface preparation. Regardless of whether it is new or already painted, the bases and primers supplied by us guarantee a perfect base for finishing.
The primer is a product developed to provide adhesion to the substrate to be painted, while the base is an intermediate layer between the primer and the finish. It can be both monocomponent or two-component.
Among our supplies you can find monocomponent primers and synthetic-polymers and anti-corrosive pigments bases, with high elasticity and adhesion, particularly suitable for difficult surfaces such as galvanized sheets, copper, aluminum, light alloys, PVC, etc.
Contact us to request a free quote. We are widespread among the provinces of Modena, Mantua, Verona and neighboring. We are also suppliers for projects throughout Italy and Europe.